| Halley & Mellowes has been supplying Mogensen Vibratory Feeders to the mineral extraction, mining, chemical processing, animal feed, food processing and other industries for nearly 30 years. Handling the many different applications has afforded our designers wide ranging experience in vibratory feeder technology. Resulting from this field experience, Halley & Mellowes has developed two ranges of Mogensen vibratory feeders, up to a maximum of 1750mm long. They are available with variable rate control or as fixed rate units. |
 |
| Type TR1 vibratory feeders |
Type SR1 vibratory feeders |
• Straight line action
• Powered by twin vibrators, rear mounted
• Suitable for horizontal or declined installation
• Maximum length 1750mm |
• Rotary action
• Powered by a single vibrator
• Declined at 10 degrees
• Maximum length 1500mm |
| Construction |
Of rugged construction throughout, generally from 6mm thick mild steel plate, both single and twin vibrator models are designed to handle wide ranges of materials included as standard is a 6mm thick mild steel bottom liner with abrasion resistant manganese, stainless steel, non stick or rubber liners as options. |
 |
| Vibrators |
| All machines in the TR1 and SR1 ranges are powered by 900 series vibrators to give guaranteed performance for either intermittent or continuously rated duties. All vibrators are dust and weatherproof with protection to IP66. The vibrators operate from a 3 phase supply, 50 or 60 Hz up to 650 volts. |
 |
Throughputs
|
| Stated throughputs are based on a material density of 1.6 t/m3, a bed depth equal to the trough height and free flowing material. The TR1 range throughputs are calculated for feeders mounted horizontally. Higher throughputs may be achieved if the bed depth is increased by using side skirts and/or declining the feeder. Throughput rates increase by approximately 2% per degree of decline. The maximal allowable decline is 10 degrees. The SR1 range throughputs are calculated for feeders declined at 10 degrees. |
